Veržlė DIN 934 M27 Plienas 8K FLZN UAB "Diktum"

Prekės kodas	300000000305
DI sugeneruota informacija	1. What is a DIN 934 Nut? DIN 934 is a standard issued by the Deutsches Institut für Normung (DIN), which specifies hexagonal nuts. These are standard six-sided nuts used in a wide variety of mechanical and structural applications to secure bolts and screws. DIN 934 = Standard hex nut (Metric) Replaced by ISO 4032, though both are still widely used 2. Technical Specifications Parameter Details Shape Hexagonal (six-sided) Thread Metric (coarse or fine pitch) Materials Steel (carbon, alloy, stainless), brass, plastic Surface Finish Zinc-plated, black oxide, hot-dip galvanized, plain Grades / Classes 4, 5, 8, 10, 12 (for steel); A2, A4 (for stainless) Standard Sizes M1.6 to M64 (metric thread sizes) 3. Typical Uses DIN 934 nuts are general-purpose fasteners used in: Machinery and equipment assembly Construction and structural connections Automotive and vehicle manufacturing Furniture assembly DIY and home repair projects They are paired with bolts, screws, threaded rods, or studs to form a reliable fastening system. These nuts apply clamping force when torqued against a mating surface. 4. Alternatives to DIN 934 Nuts Alternative Description ISO 4032 The international replacement of DIN 934 DIN 439 (Thin Nuts) Half the height of DIN 934; used in low-profile applications DIN 985 / ISO 10511 Nylon insert lock nuts for vibration resistance DIN 6923 Hex nuts with a serrated flange for better load distribution DIN 982 Prevailing torque type hex lock nuts (non-nylon) Wing Nuts (DIN 315) Hand-tightened nuts, used where tools are not required Cap Nuts (DIN 1587) Dome-topped nuts for aesthetic or protective purposes 5. Related Fastening Components DIN 934 nuts are commonly used with: Item Purpose / Description DIN 931 / DIN 933 Bolts Hex bolts with partial or full thread DIN 125 Washers Flat washers to distribute load and protect surfaces DIN 127 / 128 Spring Washers Provide resistance to loosening from vibration Threaded Rods (DIN 976) Long rods threaded along the entire length Lock Washers Prevent nuts from loosening under dynamic loads Torque Wrenches To apply proper tightening torque 6. Application Advice Use grade-matched bolts and nuts (e.g., 8.8 bolts with Class 8 nuts). Use washers to prevent surface damage and ensure even force distribution. For vibration-prone environments, consider a lock nut (DIN 985) or add a lock washer. Select appropriate coating and material for corrosion resistance in outdoor or marine environments (e.g., stainless A4).
Paviršiaus padengimas	Spec. cinko danga (gRey.coat,Ruspert,Silver,Delta,Flakezinc,Geomet)
Pagrindinis standartas	DIN934
Medžiaga	Plienas
Matavimo vienetai	Vienetai
Įpakavimo dydis	25vnt maža dėžutė
Pavadinimas	Veržlė DIN 934 M27 Plienas 8K FLZN
Produkto klasė	8
Alternatyvūs standartai	CSN 021401, ISO 4032, PN 82144, UNI 5588, EU 24032
Sriegio diametras	M27

Prekės kodas

300000000305

DI sugeneruota informacija

1. What is a DIN 934 Nut?
DIN 934 is a standard issued by the Deutsches Institut für Normung (DIN), which specifies hexagonal nuts. These are standard six-sided nuts used in a wide variety of mechanical and structural applications to secure bolts and screws.

DIN 934 = Standard hex nut (Metric)

Replaced by ISO 4032, though both are still widely used

2. Technical Specifications
Parameter Details
Shape Hexagonal (six-sided)
Thread Metric (coarse or fine pitch)
Materials Steel (carbon, alloy, stainless), brass, plastic
Surface Finish Zinc-plated, black oxide, hot-dip galvanized, plain
Grades / Classes 4, 5, 8, 10, 12 (for steel); A2, A4 (for stainless)
Standard Sizes M1.6 to M64 (metric thread sizes)

3. Typical Uses
DIN 934 nuts are general-purpose fasteners used in:

Machinery and equipment assembly

Construction and structural connections

Automotive and vehicle manufacturing

Furniture assembly

DIY and home repair projects

They are paired with bolts, screws, threaded rods, or studs to form a reliable fastening system. These nuts apply clamping force when torqued against a mating surface.

4. Alternatives to DIN 934 Nuts
Alternative Description
ISO 4032 The international replacement of DIN 934
DIN 439 (Thin Nuts) Half the height of DIN 934; used in low-profile applications
DIN 985 / ISO 10511 Nylon insert lock nuts for vibration resistance
DIN 6923 Hex nuts with a serrated flange for better load distribution
DIN 982 Prevailing torque type hex lock nuts (non-nylon)
Wing Nuts (DIN 315) Hand-tightened nuts, used where tools are not required
Cap Nuts (DIN 1587) Dome-topped nuts for aesthetic or protective purposes

5. Related Fastening Components
DIN 934 nuts are commonly used with:

Item Purpose / Description
DIN 931 / DIN 933 Bolts Hex bolts with partial or full thread
DIN 125 Washers Flat washers to distribute load and protect surfaces
DIN 127 / 128 Spring Washers Provide resistance to loosening from vibration
Threaded Rods (DIN 976) Long rods threaded along the entire length
Lock Washers Prevent nuts from loosening under dynamic loads
Torque Wrenches To apply proper tightening torque

6. Application Advice
Use grade-matched bolts and nuts (e.g., 8.8 bolts with Class 8 nuts).

Use washers to prevent surface damage and ensure even force distribution.

For vibration-prone environments, consider a lock nut (DIN 985) or add a lock washer.

Select appropriate coating and material for corrosion resistance in outdoor or marine environments (e.g., stainless A4).

Paviršiaus padengimas

Spec. cinko danga (gRey.coat,Ruspert,Silver,Delta,Flakezinc,Geomet)

Pagrindinis standartas

DIN934

Medžiaga

Plienas

Matavimo vienetai

Vienetai

Įpakavimo dydis

25vnt maža dėžutė

Pavadinimas

Veržlė DIN 934 M27 Plienas 8K FLZN

Produkto klasė

8

Alternatyvūs standartai

CSN 021401, ISO 4032, PN 82144, UNI 5588, EU 24032

Sriegio diametras

M27

Prekių kategorijos

Veržlė DIN 934 M27 Plienas 8K FLZN

Daugiau informacijos

Failai

Veržlė DIN 934 M27 Plienas 8K FLZN

Daugiau informacijos

Failai

Prenumeruokite